Dirt Racer Carbon Fiber Clutch Kit
CARBON FIBER CLUTCH COMPLETE SET DRCF230
Item: 15-19230F
Brand : EBC
Your Price: $125.93
CARBON FIBER CLUTCH COMPLETE SET DRCF230
15-19230F
Weight: 0.6 lbs
Package Dimensions: 7.35 x 10.55 x 1.35
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2000
TT-R125
TT-R125L
2001
TT-R125
TT-R125L
2002
TT-R125
TT-R125L
2003
TT-R125
TT-R125E
TT-R125L
TT-R125LE
2004
TT-R125E
TT-R125L
TT-R125LE
2005
TT-R125E
TT-R125L
TT-R125LE
2006
TT-R125E
TT-R125L
TT-R125LE
2007
TT-R125E
TT-R125L
TT-R125LE
2008
TT-R125E
TT-R125L
TT-R125LE
2009
TT-R125E
TT-R125LE
2011
TT-R125LE
2012
TT-R125LE
2013
TT-R125LE
2014
TT-R125LE
2015
TT-R125LE
CARBON FIBER CLUTCH SET DRCF25
Item: 15-19025F
Brand : EBC
Your Price: $125.93
CARBON FIBER CLUTCH SET DRCF25
15-19025F
Weight: 0.94 lbs
Package Dimensions: 7.5 x 10.5 x 1.2
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Suzuki
2002
RM85
2003
RM85
RM85L
2004
RM85
RM85L
2005
RM85
RM85L
2006
RM85
RM85L
2007
RM85
RM85L
2008
RM85
RM85L
2009
RM85
2012
RM85
RM85L
2015
RM85
2016
RM85
CARBON FIBER CLUTCH PLATE COMPLETE KIT DRCF43
Item: 15-19043F
Brand : EBC
Your Price: $222.60
CARBON FIBER CLUTCH PLATE COMPLETE KIT DRCF43
15-19043F
Weight: 1.36 lbs
Package Dimensions: 9.1 x 7.6 x 1.7
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
1987
YFZ350 Banshee
1988
YFZ350 Banshee
1989
YFZ350 Banshee
1990
YFZ350 Banshee
1991
YFZ350 Banshee
1992
YFZ350 Banshee
1993
YFZ350 Banshee
1994
YFZ350 Banshee
1995
YFZ350 Banshee
1996
YFZ350 Banshee
1997
YFZ350 Banshee
1998
YFZ350 Banshee
1999
YFZ350 Banshee
2000
YFZ350 Banshee
2001
YFZ350 Banshee
2002
YFZ350 Banshee
2003
YFZ350 Banshee
2004
YFZ350 Banshee
2005
YFZ350 Banshee
2006
YFZ350 Banshee
CARBON FIBER CLUTCH COMPLETE SET DRCF241
Item: 15-1941F
Brand : EBC
Your Price: $154.77
CARBON FIBER CLUTCH COMPLETE SET DRCF241
15-1941F
Weight: 0.83 lbs
Package Dimensions: 7.35 x 10.5 x 1.4
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
KTM
2009
65 SX
65 XC
2010
65 SX
2011
65 SX
2012
65 SX
65 SXS
2013
65 SX
65 SXS
2014
65 SX
65 SXS
2015
65 SX
65 SXS
2016
65 SX
CARBON FIBER CLUTCH COMPLETE SET DRCF111
Item: 15-1911F
Brand : EBC
Your Price: $170.95
CARBON FIBER CLUTCH COMPLETE SET DRCF111
15-1911F
Weight: 1.7285 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2002
YZ85
2003
YZ85
2004
YZ85
2005
YZ85
2006
YZ85
2007
YZ85
2008
YZ85
2009
YZ85
2010
YZ85
2011
YZ85
2012
YZ85
2013
YZ85
2014
YZ85
2015
YZ85
2016
YZ85
CARBON FIBER CLUTCH COMPLETE SET DRCF98
Item: 15-19098F
Brand : EBC
Your Price: $125.93
CARBON FIBER CLUTCH COMPLETE SET DRCF98
15-19098F
Weight: 0.78 lbs
Package Dimensions: 7.35 x 10.5 x 1.4
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Kawasaki
2000
KX65
2001
KX65
2002
KX65
2003
KX65
2004
KX65
2005
KX65
2006
KX65
2007
KX65
2008
KX65
2009
KX65
2011
KX65
2012
KX65
2013
KX65
2014
KX65
2015
KX65
2016
KX65
Suzuki
2003
DR-Z110
RM100
RM65
2004
DR-Z110
RM65
2005
DR-Z110
RM65
CARBON FIBER CLUTCH COMPLETE SET DRCF45
Item: 15-19045F
Brand : EBC
Your Price: $149.38
CARBON FIBER CLUTCH COMPLETE SET DRCF45
15-19045F
Weight: 0.93 lbs
Package Dimensions: 7.35 x 10.5 x 1.4
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Kawasaki
1998
KX100
1999
KX100
2000
KX100
2001
KX100
KX85
2002
KX100
KX85
2003
KX100
KX85
2004
KX100
KX85
2005
KX100
KX85
2006
KX100
KX85
2007
KX100
KX85
2008
KX100
KX85
2009
KX100
KX85
2010
KX85
2011
KX100
KX85
2012
KX100
KX85
2013
KX100
KX85
2014
KX100
KX85
2015
KX100
KX85
2016
KX100
KX85
2017
KX85
2018
KX85
CARBON FIBER CLUTCH PLATE COMPLETE KIT DRCF33
Item: 15-19033F
Brand : EBC
Your Price: $221.06
CARBON FIBER CLUTCH PLATE COMPLETE KIT DRCF33
15-19033F
Weight: 1.56 lbs
Package Dimensions: 8.35 x 11.65 x 1.3
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
1987
YFM350ER Moto-4
YFM350FW Big Bear 4WD [SRA]
YFM350X Warrior
1988
YFM350ER Moto-4
YFM350FW Big Bear 4WD [SRA]
YFM350X Warrior
1989
YFM350ER Moto-4
YFM350FW Big Bear 4WD [SRA]
YFM350X Warrior
1990
YFM350ER Moto-4
YFM350FW Big Bear 4WD [SRA]
YFM350X Warrior
1991
YFM350ER Moto-4
YFM350FW Big Bear 4WD [SRA]
YFM350X Warrior
1992
YFM350ER Moto-4
YFM350FW Big Bear 4WD [SRA]
YFM350X Warrior
1993
YFM350ER Moto-4
YFM350FW Big Bear 4WD [SRA]
YFM350X Warrior
1994
YFM350ER Moto-4
YFM350X Warrior
1995
YFM350X Warrior
1996
YFM350X Warrior
1997
YFM350X Warrior
1998
YFM350X Warrior
1999
YFM350X Warrior
2000
YFM350X Warrior
2001
YFM350X Warrior
2002
YFM350X Warrior
2003
YFM350X Warrior
2004
YFM350R Raptor
YFM350X Warrior
2005
YFM350R Raptor
2006
YFM350R Raptor
2007
YFM350R Raptor
2008
YFM350R Raptor
2009
YFM350R Raptor
2010
YFM350R Raptor
2011
YFM350R Raptor
2012
YFM350R Raptor
2013
YFM350R Raptor
CARBON FIBER CLUTCH COMPLETE SET DRCF88
Item: 15-19088F
Brand : EBC
Your Price: $256.51
CARBON FIBER CLUTCH COMPLETE SET DRCF88
15-19088F
Weight: 1.5033 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
1990
XT600
1991
XT600
1992
XT600
1993
XT600
1994
XT600
1995
XT600
2001
YFM660R Raptor
2002
YFM660R Raptor
2003
YFM660R Raptor
2004
YFM660R Raptor
2005
YFM660R Raptor
CARBON FIBER CLUTCH COMPLETE SET DRCF42
Item: 15-19042F
Brand : EBC
Your Price: $149.38
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF42
15-19042F
Weight: 1.42 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
1988
YFS200 Blaster
1989
YFS200 Blaster
1990
YFS200 Blaster
1991
YFS200 Blaster
1992
WR200
YFS200 Blaster
1993
YFS200 Blaster
1994
YFS200 Blaster
1995
YFS200 Blaster
1996
YFS200 Blaster
1997
YFS200 Blaster
1998
YFS200 Blaster
1999
YFS200 Blaster
2000
YFS200 Blaster
2001
YFS200 Blaster
2002
YFS200 Blaster
2003
YFS200 Blaster
2004
YFS200 Blaster
2005
YFS200 Blaster
2006
YFS200 Blaster
CARBON FIBER CLUTCH COMPLETE SET DRCF44
Item: 15-19044F
Brand : EBC
Your Price: $167.19
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF44
15-19044F
Weight: 2.41 lbs
Package Dimensions: 8.35 x 11.6 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
1983
XR350R
1984
XR350R
1985
XR350R
1986
XR250R
1987
TRX250X [SRA]
XR250R
1988
TRX250X [SRA]
XR250R
1989
XR250R
1990
XR250R
1991
TRX250X [SRA]
XR250L
XR250R
1992
TRX250X [SRA]
XR250L
XR250R
1993
TRX300EX Sportrax
XR250L
XR250R
1994
TRX300EX Sportrax
XR250L
XR250R
1995
TRX300EX Sportrax
XR250L
XR250R
1996
TRX300EX Sportrax
XR250L
1997
TRX300EX Sportrax
1998
TRX300EX Sportrax
1999
TRX300EX Sportrax
2000
TRX300EX Sportrax
2001
TRX300EX Sportrax
2002
TRX300EX Sportrax
2003
TRX300EX Sportrax
2004
TRX300EX Sportrax
2005
TRX300EX Sportrax
2006
TRX300EX Sportrax
2007
TRX300EX Sportrax
2008
TRX300EX Sportrax
2009
TRX300EX Sportrax
TRX300X
CARBON FIBER CLUTCH COMPLETE SET DRCF105
Item: 15-1905F
Brand : EBC
Your Price: $241.27
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF105
15-1905F
Weight: 2.4 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Arctic Cat
2004
400 DVX
2005
400 DVX
2006
400 DVX
Kawasaki
2003
KFX 400
KLX400R
KLX400SR
2004
KFX 400
Suzuki
2000
DR-Z400
DR-Z400E Non CA Model
DR-Z400S
2001
DR-Z400
DR-Z400E Non CA Model
DR-Z400S
2002
DR-Z400
DR-Z400E Non CA Model
DR-Z400S
2003
DR-Z400
DR-Z400E Non CA Model
DR-Z400S
Lt-Z400 QuadSport Z
2004
DR-Z400E Non CA Model
DR-Z400S
Lt-Z400 QuadSport Z
2005
DR-Z400E Non CA Model
DR-Z400S
DR-Z400SM
2006
DR-Z400E Non CA Model
DR-Z400S
DR-Z400SM
2007
DR-Z400E Non CA Model
DR-Z400S
DR-Z400SM
2008
DR-Z400S
DR-Z400SM
2009
DR-Z400S
DR-Z400SM
2011
DR-Z400S
2012
DR-Z400S
2013
DR-Z400S
DR-Z400SM
RM-Z250
2014
DR-Z400S
DR-Z400SM
RM-Z250
2015
DR-Z400S
DR-Z400SM
RM-Z250
2016
DR-Z400S
DR-Z400SM
RM-Z250
CARBON FIBER CLUTCH COMPLETE SET DRCF70
Item: 15-19070F
Brand : EBC
Your Price: $197.54
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF70
15-19070F
Weight: 2.2809 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2005
YZ125
2006
YZ125
2007
YZ125
2008
YZ125
2009
YZ125
2010
YZ125
2011
YZ125
2012
YZ125
2013
YZ125
2014
YZ125
2015
YZ125
2016
YZ125
CARBON FIBER CLUTCH COMPLETE SET DRCF182
Item: 15-1982F
Brand : EBC
Your Price: $143.97
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF182
15-1982F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2007
CRF150R
CRF150RB Expert
2008
CRF150R
CRF150RB Expert
2009
CRF150R
CRF150RB Expert
2012
CRF150R
CRF150RB Expert
2013
CRF150R
CRF150RB Expert
2014
CRF150R
CRF150RB Expert
2015
CRF150R
CRF150RB Expert
2016
CRF150R
CRF150RB Expert
CARBON FIBER CLUTCH SET DRCF306
Item: 15-19306F
Brand : EBC
Your Price: $217.57
The product is out of stock
CARBON FIBER CLUTCH SET DRCF306
15-19306F
Weight: 0.2 lbs
Package Dimensions: 5.85 x 7.05 x 1.4
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2016
CRF1000L Africa Twin
CRF1000LD Africa Twin DCT
2017
CRF1000L Africa Twin
CRF1000LD Africa Twin DCT
CARBON FIBER CLUTCH COMPLETE SET DRCF108
Item: 15-1908F
Brand : EBC
Your Price: $296.37
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF108
15-1908F
Weight: 2.1987 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
KTM
1992
250 SX
300 SX
1993
250 SX
300 SX
1994
250 SX
300 SX
1995
250 SX
300 SX
1996
250 SX
300 SX
1997
250 SX
1998
250 SX
380 Sx
1999
250 SX
380 Sx
2000
250 SX
380 Sx
2001
250 SX
380 Sx
2002
250 SX
380 Sx
2003
250 SX
2006
250 XC
250 XC-W
300 XC
300 XC-W
2007
250 XC
250 XC-W
300 XC
300 XC-W
2008
250 XC
250 XC-W
300 XC
300 XC-W
2009
250 XC
250 XC-W
300 XC
300 XC-W
2010
250 XC
250 XC-W
300 XC
300 XC-W
CARBON FIBER CLUTCH COMPLETE SET DRCF276
Item: 15-18276F
Brand : EBC
Your Price: $241.27
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF276
15-18276F
Weight: 1.88 lbs
Package Dimensions: 8.4 x 11.65 x 1.65
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2013
CRF450R
2014
CRF450R
2015
CRF450R
2016
CRF450R
CARBON FIBER CLUTCH COMPLETE SET DRCF259
Item: 15-18259F
Brand : EBC
Your Price: $241.27
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF259
15-18259F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2011
CRF450R
2012
CRF450R
CARBON FIBER CLUTCH COMPLETE SET DRCF256
Item: 15-18256F
Brand : EBC
Your Price: $213.51
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF256
15-18256F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2010
CRF250R
CARBON FIBER CLUTCH COMPLETE SET DRCF255
Item: 15-18255F
Brand : EBC
Your Price: $239.37
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF255
15-18255F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Suzuki
2010
RM-Z250
2011
RM-Z250
2012
RM-Z250
2013
RM-Z250
2014
RM-Z250
2015
RM-Z250
2016
RM-Z250
CARBON FIBER CLUTCH COMPLETE SET DRCF244
Item: 15-18244F
Brand : EBC
Your Price: $239.37
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF244
15-18244F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2009
CRF450R
2010
CRF450R
CARBON FIBER CLUTCH COMPLETE SET DRCF208
Item: 15-18208F
Brand : EBC
Your Price: $214.09
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF208
15-18208F
Weight: 2.8933 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2004
CRF250X
2005
CRF250X
2006
CRF250X
2007
CRF250X
2008
CRF250R
CRF250X
2009
CRF250R
CRF250X
2011
CRF250R
2012
CRF250R
CRF250X
2013
CRF250R
CRF250X
2015
CRF250X
2016
CRF250X
2017
CRF250X
CARBON FIBER CLUTCH COMPLETE SET DRCF113
Item: 15-1913F
Brand : EBC
Your Price: $250.87
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF113
15-1913F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2002
YZ250
2003
YZ250
2004
YZ250
2005
YZ250
2006
YZ250
2007
YZ250
2008
YZ250
2009
YZ250
2010
YZ250
2011
YZ250
2012
YZ250
2013
YZ250
2014
YZ250
2015
YZ250
2016
YZ250
YZ250X
CARBON FIBER CLUTCH COMPLETE SET DRCF155
Item: 15-1955F
Brand : EBC
Your Price: $257.87
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF155
15-1955F
Weight: 3 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Suzuki
2008
RM-Z450
2009
RM-Z450
2010
RM-Z450
RMX450Z
2011
RM-Z450
2012
RM-Z450
2013
RM-Z450
2014
RM-Z450
2015
RM-Z450
2016
RM-Z450
CARBON FIBER CLUTCH COMPLETE SET DRCF130
Item: 15-1930F
Brand : EBC
Your Price: $223.18
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF130
15-1930F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Suzuki
2002
RM125
2003
RM125
2004
RM125
2005
RM125
2006
RM125
2007
RM125
CARBON FIBER CLUTCH COMPLETE SET DRCF129
Item: 15-1929F
Brand : EBC
Your Price: $213.51
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF129
15-1929F
Weight: 2 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2004
CRF250R
2005
CRF250R
2006
CRF250R
2007
CRF250R
CARBON FIBER CLUTCH COMPLETE SET DRCF288
Item: 15-19288F
Brand : EBC
Your Price: $223.18
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF288
15-19288F
Weight: 2.1 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2014
YZ250F
2015
YZ250F
2016
YZ250F
CARBON FIBER CLUTCH COMPLETE SET DRCF287
Item: 15-19287F
Brand : EBC
Your Price: $250.87
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF287
15-19287F
Weight: 2.7 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2014
YZ450F
2015
YZ450F
2016
YZ450F
CARBON FIBER CLUTCH COMPLETE SET DRCF227
Item: 15-1927F
Brand : EBC
Your Price: $223.18
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF227
15-1927F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2008
YZ250F
2009
YZ250F
2010
YZ250F
2011
YZ250F
2012
YZ250F
2013
YZ250F
CARBON FIBER CLUTCH COMPLETE SET DRCF269
Item: 15-19269F
Brand : EBC
Your Price: $239.37
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF269
15-19269F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Kawasaki
2012
KX250F
KX450F
2013
KX250F
KX450F
2014
KX250F
KX450F
2015
KX250F
KX450F
2016
KX250F
KX450F
2017
KX250F
KX450F
CARBON FIBER CLUTCH COMPLETE SET DRCF262
Item: 15-19262F
Brand : EBC
Your Price: $207.50
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF262
15-19262F
Weight: 1.345 lbs
Package Dimensions: 10.55 x 7.4 x 1.4
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2000
CR125R
2001
CR125R
2002
CR125R
2003
CR125R
CARBON FIBER CLUTCH COMPLETE SET DRCF261
Item: 15-19261F
Brand : EBC
Your Price: $214.09
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF261
15-19261F
Weight: 1.7528 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2011
CRF250R
2012
CRF250R
2013
CRF250R
2014
CRF250R
2015
CRF250R
2016
CRF250R
2017
CRF250R
CARBON FIBER CLUTCH COMPLETE SET DRCF254
Item: 15-19254F
Brand : EBC
Your Price: $237.38
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF254
15-19254F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Suzuki
2005
RM-Z450
2006
RM-Z450
2007
RM-Z450
CARBON FIBER CLUTCH COMPLETE SET DRCF123
Item: 15-1923F
Brand : EBC
Your Price: $239.37
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF123
15-1923F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Kawasaki
2004
KX250F
2005
KX250F
2006
KX250F
2007
KX250F
2008
KX250F
2009
KX250F
2010
KX250F
2011
KX250F
2012
KX250F
2013
KX250F
2014
KX250F
2015
KX250F
2016
KX250F
2017
KX250F
Suzuki
2004
RM-Z250
2005
RM-Z250
2006
RM-Z250
CARBON FIBER CLUTCH COMPLETE SET DRCF119
Item: 15-1919F
Brand : EBC
Your Price: $223.18
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF119
15-1919F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2002
WR250F
2003
WR250F
2004
WR250F
2005
WR250F
2006
WR250F
2007
WR250F
2008
WR250F
2009
WR250F
2011
WR250F
2012
WR250F
2013
WR250F
CARBON FIBER CLUTCH COMPLETE SET DRCF148
Item: 15-1914F
Brand : EBC
Your Price: $239.37
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF148
15-1914F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2004
CRF450R
2005
CRF450R
CRF450X
2006
CRF450R
CRF450X
2007
CRF450R
CRF450X
2008
CRF450R
CRF450X
2009
CRF450X
2012
CRF450X
2013
CRF450X
2014
CRF450X
2015
CRF450X
2016
CRF450X
2017
CRF450X
CARBON FIBER CLUTCH COMPLETE SET DRCF109
Item: 15-1909F
Brand : EBC
Your Price: $223.18
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF109
15-1909F
Weight: 1.6 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2001
WR250F
YZ250F
2002
YZ250F
2003
YZ250F
2004
YZ250F
2005
YZ250F
2006
YZ250F
2007
YZ250F
CARBON FIBER CLUTCH COMPLETE SET DRCF107
Item: 15-1907F
Brand : EBC
Your Price: $143.23
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF107
15-1907F
Weight: 1.6 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
KTM
1998
60 Sx
65 SX
1999
60 Sx
65 SX
2000
60 Sx
65 SX
2001
65 SX
2002
65 SX
2003
65 SX
2004
65 SX
2005
65 SX
2006
65 SX
2007
65 SX
2008
65 SX
65 XC
CARBON FIBER CLUTCH COMPLETE SET DRCF79
Item: 15-19079F
Brand : EBC
Your Price: $235.10
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF79
15-19079F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
1994
CR250R
1995
CR250R
1996
CR250R
1997
CR250R
1998
CR250R
1999
CR250R
2000
CR250R
2001
CR250R
2002
CR250R
2003
CR250R
2004
CR250R
2005
CR250R
2006
CR250R
2007
CR250R
CARBON FIBER COMPLETE CLUTCH KIT DRCF54
Item: 15-19054F
Brand : EBC
Your Price: $209.43
The product is out of stock
CARBON FIBER COMPLETE CLUTCH KIT DRCF54
15-19054F
Weight: 2.45 lbs
Package Dimensions: 7.55 x 11.3 x 2.5
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2013
XR650L
2014
XR650L
2015
XR650L
CARBON FIBER CLUTCH COMPLETE SET DRCF49
Item: 15-19049F
Brand : EBC
Your Price: $99.20
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF49
15-19049F
Weight: 2.1987 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2004
CRF100F
2005
CRF100F
2006
CRF100F
2007
CRF100F
2008
CRF100F
2009
CRF100F
2011
CRF100F
2012
CRF100F
2013
CRF100F
CARBON FIBER CLUTCH COMPLETE SET DRCF46
Item: 15-19046F
Brand : EBC
Your Price: $252.33
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF46
15-19046F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Kawasaki
1992
KX250
1993
KX250
1994
KX250
1995
KX250
1996
KX250
1997
KX250
1998
KX250
1999
KX250
2000
KX250
2001
KX250
2002
KX250
2003
KX250
2004
KX250
2005
KX250
2006
KX250
2007
KX250
CARBON FIBER CLUTCH COMPLETE SET DRCF101
Item: 15-1900F
Brand : EBC
Your Price: $207.50
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF101
15-1900F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Honda
2000
CR125R
2001
CR125R
2002
CR125R
2003
CR125R
2004
CR125R
2005
CR125R
2006
CR125R
2007
CR125R
CARBON FIBER CLUTCH COMPLETE SET DRCF195
Item: 15-1995F
Brand : EBC
Your Price: $250.87
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF195
15-1995F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Yamaha
2007
YZ450F
2008
YZ450F
2009
YZ450F
2010
YZ450F
2011
YZ450F
2012
YZ450F
2013
YZ450F
CARBON FIBER CLUTCH COMPLETE SET DRCF189
Item: 15-1989F
Brand : EBC
Your Price: $223.18
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF189
15-1989F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Suzuki
2007
RM-Z250
2008
RM-Z250
2009
RM-Z250
CARBON FIBER CLUTCH COMPLETE SET DRCF158
Item: 15-1958F
Brand : EBC
Your Price: $239.37
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF158
15-1958F
Weight: 1.92 lbs
Package Dimensions: 8.4 x 11.65 x 1.75
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
Kawasaki
2006
KX450F
2007
KX450F
2008
KLX450R
KX450F
2009
KLX450R
KX450F
2010
KX450F
2011
KX450F
CARBON FIBER CLUTCH COMPLETE SET DRCF163
Item: 15-1963F
Brand : EBC
Your Price: $207.50
The product is out of stock
CARBON FIBER CLUTCH COMPLETE SET DRCF163
15-1963F
Weight: 2.05 lbs
Package Dimensions: 0 x 0 x 0
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
- Full set of friction plates precision measured as an assembly for your bike
- Full set of pin planished steel plates for better lube distribution
- Shot peened heat treated and tempered carbon steel clutch springs
Product fitment
KTM
2006
250 SX-F
250 XCF-W
2007
250 SX-F
250 XC-F
250 XCF-W
2008
250 SX-F
250 XC-F
250 XCF-W
2009
250 SX-F
250 XC-F
250 XCF-W
2010
250 SX-F
250 XCF-W
2011
250 SX-F
250 XCF-W
2012
250 XCF-W
2013
250 XCF-W
2014
250 XCF-W
2015
250 XCF-W
2016
250 XCF-W
The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.
